Planning a New Driveway in Hampshire? Here's What UK Resin Costs Actually Look Like
Resin driveway cost guides online often quote wide price bands without explaining what moves the needle. This guide breaks down what the £65–£110/m² range actually means for Hampshire homeowners — what's included, what isn't, and how to compare quotes properly.
How Hampshire Pricing Compares to the UK Average
Hampshire sits in the mid-range of UK resin driveway pricing. London and the South East core run 10–20% higher on labour; the North and Midlands are generally lower. For most Hampshire homeowners, a complete driveway — fully installed with kit, edging, and clean-up — comes to £1,950–£5,500, depending on size and base condition. The headline £65/m² figure is achievable on a sound existing tarmac or concrete base with standard aggregate.
The Two Variables That Matter Most
Base condition is the single biggest cost variable. A sound existing tarmac or concrete surface avoids full sub-base replacement, saving £15–£30/m². Aggregate choice is second: standard UK quartz is the base rate; premium imported stone (Mocha, Pearl, Graphite blends) adds £5–£15/m². Everything else — ACO drainage channels (£200–£400), recessed manhole covers (£150–£300 each), decorative edging (£150–£400) — should be itemised separately in any written quote you receive.
What Those Numbers Look Like on a Real Hampshire Driveway
Typical fully installed totals for Hampshire: 20m² ~£1,300; 30m² ~£1,950; 40m² ~£2,600; 60m² ~£3,900; 80m² ~£5,200. These are fixed-price all-in figures on a sound existing base — not day-rate estimates. If full sub-base replacement is needed (common on older concrete drives over 25 years), add £15–£30/m² to each. The only way to get an accurate figure for your specific property is a free site survey — we provide a fixed written quote within 24 hours.
Frequently Asked Questions
What does a resin driveway cost per square metre in Hampshire?
£65–£110/m² fully installed in Hampshire. The lower end applies to sound existing bases with standard aggregate; the upper end reflects full sub-base replacement or premium aggregate. Most projects land in the £70–£90/m² range.
Are there any hidden costs to watch for?
With any reputable Hampshire installer, no — because everything should be in the written fixed-price quote before work starts. Watch for quotes that price the resin layer only and exclude base preparation, edging, drainage, and manhole work. Always ask for an itemised quote.
Does the size of the driveway affect the price per m²?
Yes — larger drives typically achieve a slightly lower per-m² rate due to economies of scale on labour and material setup costs. A 20m² drive may run £75–£85/m²; an 80m² drive may come in closer to £65–£75/m², all else being equal.
How do Hampshire prices compare to getting quotes from online national companies?
National comparison sites often show attractive headline prices but use local subcontractors with varying standards. A local Hampshire installer with a verifiable address, written guarantee, and a site survey process gives you accountability that a national lead-generation platform cannot.
Get a Free Quote in Hampshire
Call 07384 599889 or request a free quote online. See all our seasonal driveway services.