Resin Driveways Farnham — Planning Permission, Costs & What to Expect
Farnham (GU9, GU10) is one of Hampshire's most sought-after addresses, and a resin-bound driveway is one of the few home improvements that adds visible kerb appeal from the moment it is laid. This guide is written specifically for Farnham properties — covering realistic costs for the town's mix of Victorian terraces and 1930s–60s detached homes, why the local greensand geology works in your favour, and which aggregate colours suit the area's traditional brick and stone.
Do You Need Planning Permission for a Resin Driveway in Farnham
No — in almost all cases. Since 2008, any new front driveway over 5m² in Farnham using an impermeable surface (standard concrete or solid block paving without drainage channels) requires planning permission. A resin-bound driveway is fully permeable — rainwater drains straight through the surface — so it falls under permitted development with no planning application needed. This applies whether you are replacing an old driveway or laying a new one on a previously unpaved area.
Why Permeable Matters in Farnham
Beyond the planning advantage, a permeable driveway has real practical value: it reduces surface water run-off into the street drainage system, prevents standing water on the surface after heavy rain, and meets SuDS requirements that are increasingly enforced on new development across Hampshire. Farnham's greensand and sandy loam geology makes it one of the more favourable Hampshire towns for resin-bound installation — the naturally free-draining subsoil means sub-base preparation is often more straightforward than in clay-heavy areas, and the stable ground gives the resin matrix an excellent long-term foundation. Many Farnham properties have ageing tarmac driveways that have been patched repeatedly over 30–40 years; resin-bound laid over a prepared base replaces the entire problem with a single, seamless surface. Warm Buff and Pearl aggregates complement Farnham's traditional red brick and local stone particularly well, and the high property values in GU9 and GU10 mean a quality driveway adds genuine kerb-appeal return.
What a Farnham Installation Involves
A typical Farnham resin-bound driveway takes 2–4 days from start to finish: the existing surface is inspected and either prepared for overlay or broken out if a new sub-base is needed; edging and any drainage channels are installed; the resin-aggregate mix is trowelled in a single seamless pour. The surface cures in 4–8 hours and is ready for foot traffic overnight, vehicles after 24 hours. We leave the site clean on completion.
Costs in Farnham
Resin driveway installation in Farnham runs £65–£110 per m² fully installed. Farnham has one of the wider driveway-size ranges in Hampshire — compact Victorian terraces near the town centre typically have 15–20m² drives (from around £975 fully installed), while larger detached properties in Wrecclesham and Rowledge often have double-width drives of 60–80m² (£3,900–£8,800). The free-draining greensand subsoil means that where an existing tarmac or concrete base is sound, sub-base replacement is often not required, which keeps costs toward the lower end of the £65–110/m² range for many Farnham properties. Every job is priced on a fixed written quote — no day-rate surprises.
Areas We Cover Near Farnham
We install across Farnham (GU9, GU10) and surrounding villages including Rowledge, Wrecclesham, Badshot Lea, and Hale.
Get a Free Quote
Call 07384 599889 or request a free quote online. See all our seasonal offers.